User guide

WARNINGS AND
C
AUTIONS
The Servo Cutter CSC models need regular, scheduled main-
tenance for peak performance. Among the features that
require maintenance are:
● Cutter blades
● Blade mounting hardware
● Cutter bushings
● The knife guard hardware
● Cutter alignment
● Floor locks
● Lubrication tray
● Shafts of optional slide rail system
● Electrical cables
● Control panel lights
MAINTENANCE
FEATURES
CSC Servo Knife Cutters UGE047/1003
5-2 MAINTENANCE
To maintain the best performance of the servo cutter, it must
be cleaned and inspected regularly. Maintenance includes a
daily, weekly, quarterly, and semi-annual (every 6 months)
schedule.
Use this maintenance schedule as a guide. You may need to
shorten the time of the maintenance schedule, depending on
how often you use the servo cutter, and the types of material
flowing through it.
Follow all precautions and warnings when working on the
equipment.
WARNING: Improper installation,
operation, or servicing may result in
equipment damage or personal injury.
This equipment should only be installed, adjust-
ed, and serviced by qualified technical person-
nel who are familiar with the construction, oper-
ation, and potential hazards of this type of
machine.
All wiring, disconnects, and fuses should be
installed by qualified electrical technicians in
accordance with electrical codes in your region.