User guide

Move the servo cutter into position. Place the
servo cutter in position downstream of the belt puller.
Determine the best distance from the belt puller to
the CSC cutter.
● For flexible products, the cutter should be as close
as possible to the puller.
● For rigid products, leave enough space to allow the
product to flex during the cutting cycle. In some
cases, it may be necessary to allow 6-8 feet between
the puller and cutter.
Align the cutter with the extrusion line.
CSC Servo Knife Cutters UGE047/1003
3-4 INSTALLATION
1
P
OSITIONING
THE
SERVO
CUTTER
CAUTION: Lifting
To avoid personal injury or damage to the cut-
ter, lift the cutter using a forklift or hoist with
straps that have been positioned at the cutter's
center of gravity.
2
3
Cutter