User guide

Blade Wipe
The blade wipe system keeps the cutting blade clean by
removing lubricant and particles from the blade. A felt pad
sandwiched between two pieces of stainless steel and mounted
in the stainless steel blade lubrication tray wipes the knife
before each cut.
Multiple batch and length mode
This advanced cutter control offers many additional features:
● Four preset cut lengths with individual outputs and a batch
output
● Cuff sequencing mode for multiple cutting per cuff
End Sense
This option allows the use of an electric eye to produce a cut
signal. Two types of electric eye brackets are included:
● A bracket for cutting parts 3.5-24 inches long. This brack-
et is mounted on the bushing holder, and uses a triple-
beam eye with a red dot for easy setup and alignment.
Coarse and fine adjustments are provided with the eye
positioned above the extrudate.
● A bracket for cutting parts up to 10 feet long. This bracket
is designed to mount on a discharge conveyor. The elec-
tric eye used with this bracket is a through beam type and
can be adjusted to pick up products that are at least 0.100
inches high (height of piece above the conveyor).
UGE047/1003 CSC Servo Knife Cutters
DESCRIPTION 2-9
OPTIONAL
EQUIPMENT
NOTE: With this bracket and eye mounting, the
part must be rigid enough not to sag or
flex at the cut distance.