2-in-1 Fabric Steamer Model CGS19A
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following: WARNING: The polyethylene bags over the product or its packaging may be dangerous. Keep these bags out of the reach of babies and children. Never use them in cribs, children’s beds, pushchairs or playpens. The thin film may cling to the nose and mouth and prevent breathing. A bag is not a toy.
4. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 5. Iron is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking. Do not attempt to repair the appliance. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons when the appliance is used. 6. Keep the cord away from heated surfaces. Do not allow cord to contact heated surfaces.
18. When installing or removing attachment, please be sure the unit is off and no steam is being released to avoid contact with hot water. 19. Use caution when installing or removing attachment as it may contain hot water from condensation. Ensure the attachment is dry or cooled off to avoid contact with hot water. 20. To avoid a circuit overload, do not operate another high wattage appliance on the same circuit. 21. If an extension cord is necessary, a 10 amp cord should be used.
GETTING TO KNOW YOUR STEAMER Variable temperature control dial Water tank release lever Removable water tank Rotating handle Handle release button "Continuous steam" button Stainless steel soleplate Steam ready indicator
OPERATING INSTRUCTIONS 1. The CGS19A Fabric Steamer functions as both a steamer and an iron. Simply depress the rotating handle release button and rotate the handle out for steaming and in for ironing. 2. Plug the unit into your electrical outlet. Both red and green lights will glow. Red light indicates the appliance is plugged in and the green light indicates the appliance is heating up. When the green light goes off, the appliance is ready.
3. U sing the other hand, turn the locking cover tab and push the attachment away from the handle. Grab the ribbed surface on the side of the attachment and pull off. 4. After use, reverse the process in step two. Removeable Lint/Fabric Bristle & Soleplate cover Crease Attachment For upright steaming 1. Turn the variable temperature control dial to the High 3 dots (···) setting. The unit will take approximately two minutes to reach this temperature.
2. Hang your garment or fabric. 3. Pass the steam jets just above the fabric where the wrinkles are. It may take a few passes to remove the wrinkles completely. 4. After use, empty any remaining water from the tank to avoid leakage. CREASE ATTACHMENT TIPS The crease attachment is designed for use with one hand. Fabric and garments should easily slide into the attachment. Do not touch any part of the crease attachment when in use. 1. Hang your garment or fabric. 2.
3. W hen pressing, it is recommended that you use an ironing board to achieve good results and prevent damage to furniture and other surfaces. 4. If pressing different types of fabrics, start by pressing delicate fabrics first at lower temperatures and gradually progress to higher temperatures. STORAGE 1. Turn off and unplug appliance after using. 2. Allow to cool before storing. 3. Empty any remaining water from the tank to avoid leakage. 4. Store in a cool, dry place, out of reach of children.
LIMITED ONE YEAR WARRANTY This product is subject to the express warranty given on the warranty card included with the product, as may be amended by reference to and in accordance with the terms of the warranty cards displayed on Conair Australia website www.conairaustralia. com.au To make a warranty claim you must retain your proof of purchase. Further details can be found at www.conairaustralia.com.au and click on ‘customer service’.
® ©2012 Conair Australia Pty Ltd, Suites 20 & 21,Ground Floor, 7 Narabang Way, Belrose NSW 2085. Australia Customer Service Hotline Australia: 1800 650 263 New Zealand: 0800 266 247 E-mail us at: aus_info@conair.
