Specifications

64
Replacingthellvalve
1. Takethehumidieroutofoperation,asdescribedinchapter7.5.
2. Undothescrew(phillipsscrewdriver)andremovetherightsidepanel.
3. Removetheconnectioncablestothellvalve(noteassignmentbeforeremoval).
4. Removehoseclampsonthellvalveconnectionsandpulloffthehoses.
5. Undothetwoscrewsxingthellvalvetothehousing,thenremovethellvalve.
Re-installationiscarriedoutinthereversesequence.Makesurethehosesarecorrectlysecured
withthehoseclampsandthecablesareconnectedcorrectly.
Replacing the water level unit
1. Takethehumidieroutofoperation,asdescribedinchapter7.5.
2. Undothescrew(phillipsscrewdriver)andremovetheleftfrontpanel.
3. Remove the connection cable to the level unit.
4. Remove hose clamps on the level unit connections and pull off the hoses.
5 Squeezebothsidesofthemountingbrackettoreleaseitfromtheslotsinthesupportbracket
behindthewaterlevelunit,thenremovethelevelunit.
Re-installationiscarriedoutinthereversesequence.Makesurethehosearecorrectlysecuredwith
the hose clamps and the cable is connected correctly.