Specifications

63
Replacingthetransformer
1. Takethehumidieroutofoperation,asdescribedinchapter7.5.
2. Undothescrew(phillipsscrewdriver)andremovetherightfrontpanel.
3. Remove the connection cables to the transformer, if necessary labeling the cables before removal.
4. Unscrewthetwonutsandremovehetransformer.
Re-installationiscarriedout inthereversesequence. Make surethecablesare connected cor-
rectly.
Replacingthedrainpump
1. Takethehumidieroutofoperation,asdescribedinchapter7.5.
Important!Ifdrainpumpisdefective,draintankmanuallyviatheauxiliarydrain.
2. Undothescrew(phillipsscrewdriver)andremovetherightsidepanel.
3. Remove the connection cables to the drain pump (note assignment before removal).
4. Remove hose clamps on the drain pump connections and pull off the hoses, then remove the
drain pump.
Re-installationiscarriedoutinthereversesequence.Makesurethehosesarecorrectlysecured
withthehoseclampsandthecablesareconnectedcorrectly.