Specifications

53
Note:fordetailedinformationregardingtheoperationofthecontrolunitandthecongurationset-
tings please observe the information given in the separate operating instructions to the Condair
GS control.
7.4 Notes on operation
7.4.1 Remoteoperatingandfaultindication
Viatheoperatingandfaultindicationthefollowingoperatingstatusareshownremotely:
Activatedremote
indication relay
When? Display on unit
“Error” A malfunction (fault status) is
present, further operation is not pos-
sible.
Red LED lights
A corresponding fault message is
showninthedisplay
“Service” Maintenance is due. The unit re-
mains operational for a certain time.
YellowLEDlights
Theservicewarningmessageis
showninthedisplay
“Steamdemand” Steam demand/
Steam production
Green LED lights.
The standard operating display is
shown.
“Uniton” Unitswitchedon Unitswitchlights.
The standard operating display is
shown.
7.4.2 Inspections during operation
DuringoperationtheCondairGSandthehumidicationsystemhavetobeinspectedweekly.On
thisoccasioncheckthefollowing:
• thewater,gasandsteaminstallationforanyleakage.
• thehumidierandtheothersystemcomponentsforcorrectxingandanydamage.
• theelectricinstallationforanydamage.
Iftheinspectionrevealsanyirregularities(e.g.leakage,errorindication)oranydamagedcompo-
nentstaketheCondairGSoutofoperationasdescribedinchapter7.5.Then,contactyourCondair
representative.