Specifications

27
Drain pan
to drain
Shallowduct
Drain pan
Ceiling
to drain
Branchduct
Note: When locating the OptiSorp steam distribution system please note the instructions in the
separate documentation for this product.
Guidelinesfordimensioningtheventilationducts
– Tofacilitatetheinstallationofthesteamdistributionpipesandforcontrolpurposes,asufciently
sized control opening should be planned.
– Withintherangeofthehumidicationdistance,theventilationductshouldbewaterproofed.
– Lowtemperatureductsbelow15°C,shallowducts,orbranchductsmightrequiretheuseofa
eldsuppliedcondensatedrainpanbelowthesteamdistributor(seegurebelow).
– Airductspassingthroughcoldroomsshouldbeinsulatedtopreventthehumidiedairfromcon-
densingalongtheductwall.
– Poorairowconditionswithintheairduct(e.g.causedbyobstacles,tightbends,etc.)canlead
tocondensationofthehumidiedair.
– Steam distribution pipes must not be mounted to round ducts.
– Exerciseextremecautionwheninstallinginberglassorinternallylinedducts.Ifnecessary,re-
move10-15cmoftheliningwherethesteamisbeingintroduced.
IfyouhavequestionsrelatingtothedimensioningofventilationductsincombinationwithCondair
steamhumidiers,contactyourCondairsupplier.
Installingthesteamdistributionpipes/OptiSorpsteamdistributionsystem
Detailed information on the installation of steam distribution pipes and OptiSorp steam distribution
system can be found in the separate “Mounting Instructions” for this products.