User guide

TrueFeed manual
63
APPENDIX H: TrueFeed Quality Checklist
Date of production : …………………
Conair order number : …………………
Control serial number : …………………
Software version : …………………
Motor serial number : …………………
Unique ID code : …………………
Check original order with internal packing list
Order code : ……………………………………………………………………
Cylinder check
 Fill in the type of cylinder ………
 Fill in the cylinder length ………in {mm}
 Check for cylinder wrench
Stepper motor check
 Direction motor rotation from rear view ( motor number side )
 Check if cable and connector are fastened well.
 Check sealing.
Hopper check
 Check hopper edges for blurs
 Check lid for sharp edges
 Check slide valve
 Check sealing ring
 Check sight glasses
Throat adaptor check
 Check sight glass and the inside if everything is clean
 Check fitting of the feeding house
 Check curled knob length and fitting
Complete unit check / Functional test at least 4 hours
 Perform load cell calibration
 Perform a weight check with the 1.1 lb {500 g} reference weight
 Perform a Master Reset ALL [CONFIGURATIONS menu]
 Check internal File System by making a JOB [PRODUCTION menu]
 Perform functional test with motor (200 rpm)
 Check timer, tachometer and relay
 Power cable ……… /warning label
 Check input cable/ warning label
 Check appropriate users manual
 Check (optional) alarm flash light
 Check (optional) valve output
Automatic hopper loader check (Optional)
 No automatic hopper loader supplied
 ME hopper loader
 MV hopper loader
 EX hopper loader