User guide

TrueFeed manual
4
3.2 Weighing frame
The black part is the weighing frame.
Do not touch the weighing frame (and dispensing unit) while feeding, it will influence operation.
Do not touch the safety bolts under the weighing platform. These are for overload protection.
There must be space between the safety bolts and the frame.
3.3 Motor and feeding system
There two (2) feeding systems, the dispensing cylinder and the feed screw.
(See Chapter 5 for more information)
Safety bolts
(total of 4)
Balance frame (when option
selected)
Transport protection pin
Hopper loader tube support
The serial number of the motor can be found on the
backside of the motor.
Motor shaft:
The motor shaft is equipped with one flat side which
fits precisely in the shaft of the dispensing cylinder.
To connect the dispensing cylinder, place it on the
motor shaft while turning it to find the flat side, then
push the dispensing cylinder completely backwards.