User guide

TrueFeed manual
37
ALARMS
Error 08 “Motor connection failure”
Motor connection is not correct.
- Ensure that the motor is connected.
- Check cables and connectors for damage.
Error 09 “Parameters damaged”
Some CONFIGURATIONS parameters are incorrect.
- Check the CONFIGURATIONS parameters.
Error 10 “Parameters set to factory defaults”
All parameter settings are reset to factory defaults.
- Check all parameter settings.
Error 11 “Load cell calibration set to factory defaults”
Load cell calibration is incorrect and has been reset to factory defaults.
- Recalibrate the load cell.
Error 12
“JOBs and curve database initialized”
All JOBs and materials are reset.
- Make new material calibrations and Jobs.
Error 13 “Load cell connection failure”
-Load cell connection is not correct.
-Load cell connector is not connected to the control.
7.13 Files
In this “File manager” menu, files (JOBs and Material curves) can be searched, renamed and deleted.
When entering the file manager menu, two file types can be selected:
-Material (material calibrations)
-JOBs (Production JOBs)
After confirming, the file list will be shown. Now you can search for files, rename or delete them.
If the JOB or Material curve you are searching for is not in the list, fill in the first letter(s) or complete name
of the JOB or Material curve and press “Enter”. Now a filtered list appears. To go back to the main list, fill in the
selection spaces and press “Enter”.
It is also possible to fill in the Job or Material curve immediately in the File Manager and press “Enter. To clear
the description, fill in the selection with spaces or select an empty JOB or material out of the list and press
“Enter”.
Search:
= Scroll through the files.
Delete:
= Delete a file, press “Enter” to confirm.
Rename:
= Rename a file, press “Enter” to confirm.