User guide

TrueFeed manual
29
7.9 Production JOB
What is a Production JOB?
In a production job the relevant production data will be stored.
The following data will be stored in a JOB, depending on the TrueFeed’s configuration:
CONFIGURATIONS settings: Control mode: GRAVI / RPM
Prod. Mode: INJ / EXT
Input mode: Timer / relay / tachometer
PRODUCTION settings: Job description: Name of the job
Shot wth.: Weight of the part
color% : Color amount (%)
feed time: Feeding time (sec.)
Ext. cap.: Extruder capacity (kg/h)
Max. tachometer: Maximum tachometer voltage (v)
RPM: Motor speed (RPM)
CALIBRATION: Material calibration: Stored material calibration
How can I use a Production JOB?

Production JOB is only visible if enabled in the CONFIGURATIONS menu.
First enable the JOB functionality in CONFIGURATIONS menu.
A Production JOB can be made in the PRODUCTION menu.
• Fill in the production settings
• Go to save JOB
• Select “YES” to save
• Give the JOB a description (maximum of eight characters)
• Save “YES”
• Confirm by pressing “Enter”
All the settings as described above will be stored.
The JOB will be selected in the PRODUCTION settings screen immediately.
How can I select a Production JOB?
When one or more JOBs are made, one can be selected as follows:
• Navigate to PRODUCTION menu.
• Use the cursor to go to Prod JOB.
• Press the “Enter” button for two (2) seconds
• A list will appear with stored JOB files
• Select one with the arrow buttons and press “Enter”

When using a production job, the set CONFIGURATIONS will be overwritten.
If the JOB made is not in the list, fill in the first letter(s) of the JOB and press “Enter”. Now a filtered list
appears. To go back to the main list, fill in the selection with spaces and press “Enter”.
It is also possible to fill in the JOB description immediately in the PRODUCTION menu and press “Enter”. The
message “JOB not found, select other JOB” appears when a false JOB is filled in.
To clear the JOB description, fill in the selection with spaces or select an empty JOB out of the JOB list and
press “Enter”.
How can I delete or rename a Production JOB?
To delete or rename one or more JOB, see Chapter 7.13
To delete all JOBs select master reset JOBS in the CONFIGURATIONS menu and press “Enter”.