User guide

TrueFeed manual
27
EXTRUSION
Extrusion / Gravimetric mode
Production Settings
Ref.Curve: Type of reference curve: pre-programmed curve or user-defined curve.
Prod Job : Name of the production Job
Material : Name of material calibration
Color % : Color amount (%)
Ext.cap : Maximum extruder capacity (kg/h)
Max tachometer: Maximum tachometer voltage (v)
Only visible in Tachometer mode
Set tachometer : Automatic voltage take over from tachometer generator
Only visible in Tachometer mode
Save job : Save production settings into a job
Test: : Initial production test with set speed for 30 seconds.
Actual production data
Ext. act : Actual extruder capacity (kg/h)
Only visible in Tachometer mode
Act tachometer : Actual voltage of the tachometer generator (v)
Only visible in Tachometer mode
Col. set : Calculated output (gr/sec)
Col. act. : Actual color output (gr/sec)
Actual color output is only visible after the first automatic RPM adjustment.
Hopper : Material weight in the hopper
>< : Standstill sign. When the vibrations are too large, this sign disappears!
Speed : Actual motor speed (RPM)
Status : Status of the feeding: Standby / Feeding / Filling
Extrusion / RPM mode
Production Settings
Prod Job :Name of the production Job
Set speed :Set motor speed (RPM)
Max tachometer : Maximum tachometer voltage (v)
Only visible in Tachometer mode
Set tachometer : Automatic voltage take over from tachometer generator
Only visible in Tachometer mode
Save job : Save production settings into a job
Test : Initial production test with set speed and time
Actual production data
Act tachometer: Actual voltage of the tachometer generator (v)
Only visible in Tachometer mode
Speed : Actual motor speed (RPM)
Status : Status of the feeding: Standby / feeding / filling
PRODUCTION SETTINGS
Ref Curve : MOVA/USER
Prod Job : xxxxxxxx
Material : xxxxxxxx
Color % : x.xxx %
Ext.cap : xxxxx.x kg/h
Max tachometer: xxx,x
v
Set tachometer: NO/YES
Save job : NO/YES
Test : NO/YES
PRODUCTION DATA
Ext.act. : xxxxx.x kg/h
Act tachometer : xxx,x
v Col. Set. : x.xxx
gr/s
Col. Act. : x,xxx gr/s
Hopper : xxxx gr ><
Speed : rpm
Status : Feeding
PRODUCTION SETTINGS
Prod Job : xxxxxxxx
Set speed xxx.x rpm
Max tachometer: xxx.x v
Set tachometer: NO/YES
Save job : NO/YES
Test : NO/YES
PRODUCTION DATA
Act tachometer : xxx.x
v
Speed : xxx.x rpm
Status : Feeding