User guide

TrueFeed manual
20
CONFIGURATIONS: Tooling password
Password for Tooling user level, 4 numerals, default: 1111
CONFIGURATIONS: Supervisor password
Password for Supervisor user level 4 numerals, default: 2222
CONFIGURATIONS: Conversion
Selection of Units: Metric = European [gr/s]
Imperial = US [lbs/hr]
Kg/h = In extrusion mode the capacity will be shown in kg/h instead of gr/s
CONFIGURATIONS: Full scale
Selected load cell will be shown (read-only)
CONFIGURATIONS: Modbus unit
If the control is used within a Modbus network, the unique identity can be entered here (1-231)
CONFIGURATIONS: Date
Actual date (dd / mm / yy)
CONFIGURATIONS: Time
Actual time (hh / mm / ss)
Date and time will be stored for a minimum of 1500 hours when the control is switched OFF.