User guide

TrueFeed manual
8
Take out the window
in a 45° angle for
easy cleaning.
Removable top
flange for easy
machining.
Barrel
Horizontally leveled
(Water leveled)
Curled knob
Main material
hopper
90°
Hopper
assembly
Transport
protection pin
6. Installation
6.1 Transport
To protect the TrueFeed against damage during transport, the unit is packed in a cardboard box filled with
foam. Delivery terms are FOB Franklin, PA. The buyer is responsible for the transport. Conair cannot be held
liable for any damage that may occur during transportation.
6.2 Receipt
Inspect the unit thoroughly upon receipt. Pass any remarks to the local agent or Conair within eight days from
receipt of goods.
6.3 Mechanical installation
Most mechanical parts are pre-assembled, making installation quick and simple.
1. When installing the main material hopper (not included
with feeder purchase) on top of the throat adaptor, the
top flange of the NST40 throat adaptor needs to be
drilled to match. The lid of the throat adaptor can be
removed for easy machining.
2. -Install the throat adaptor directly on top of the inlet
of the production machine.
-Install the throat adaptor at a 90-degree angle to the
machine barrel. This will optimize the feeding accuracy
in relation to vibrations of the production machine.
-Ensure that the entire unit is mounted
horizontally level
and fixed securely.
-Assure proper grounding to control cabinet,
throat adaptor and feeder.
3. Remove the transport
protection pin (at the bottom
of the load cell frame) before
mounting the hopper
assembly.
This is just a pin on a flexible
chain; do not remove the stainless steel plate!
4. Connect the hopper assembly to the throat adaptor
by turning the curled knob clockwise. Ensure that the
curled knob is tightened firmly.
5. Mount the control in a vibration free area and away from
high temperatures.
Install the throat adapter at a 90-degree angle to the
machine barrel. As shown in the picture above.