Technical information

The portable chiller comes fully assembled in a single crate.

The Air cooled units are shipped without the casters attached.

The casters must be attached during unpacking.

UNPACKING THE

BOXES

Portable Chillers UGH024/1103

3-2 INSTALLATION

CAUTION: Lifting

Conair Portable Chillers are designed to easily

roll on casters. If, for some reason you need to

lift the chiller, take all precautions to avoid per-

sonal injury or damage to the chiller. Lift the

chiller using a forklift or hoist with straps that

have been positioned at the chillers’ center of

gravity. Do not try to lift the unit manually.

Carefully uncrate the chiller and its

components.

Remove all packing material, protective paper,

tape, and plastic. Compare contents to the shipping

papers to ensure that you have all the parts.

Carefully inspect all components to make sure

no damage occurred during shipping. If any damage is

found, notify the shipping agent immediately. Check all

wire terminal connections, bolts, and any other electrical

connections, which may have come loose during ship-

ping. Check for pinched wires and kinked hoses.

Cut the bands holding the chiller on the pallet.

With a forklift lift the chiller high enough to

attach the casters, if shipped unattached. Thread the cast-

ers into the threaded plates on each corner of the unit.

Record serial numbers and specifications

for the chiller in the blanks provided on the back of the

User Guide’s title page. This information will be helpful

if you ever need service or parts.