Technical information

The Conair Portable Chillers can be used anywhere a reliable
source of process cooling water - with stable temperature con-
trol - is required.
These portable chillers are available for cooling injection
molding, blow molding, thermoforming, extrusion, air com-
pressors, metal plating, anodizing, degreasing, heatset/web
offset printing presses, and dryer after-coolers.
Roll the air-cooled model next to the heat source, connect it,
and plug it in. They can operate almost anywhere.
The water-cooled models require a source of condenser water.
Normally used in conjunction with a recirculating evaporative
cooling tower system, the units have slightly better operating
energy efficiencies.
TYPICAL
APPLICATIONS
UGH024/1103 Portable Chillers
DESCRIPTION 2-3
LIMITATIONS
Conair Portable Chillers are designed to provide chilled water
for industrial applications requiring 24-hour-a-day perfor-
mance. Units are self-contained and easy to install and main-
tain. Choose the Conair Portable Chillers based on the cooling
load and the capacity of the unit. Pick your Conair Portable
Chillers based on:
l Cooling load
Choose a portable chiller that has 10% more capacity
than the process load.
l Location
Choose a water-cooled model if the unit will be located
in an air-conditioned area. Choose the water-cooled
model if a source of condenser water is readily available
(i.e. cooling tower water). Do not locate the portable
chiller outside unless the unit is specially modified.
l Temperature
The portable chiller needs to provide a cooling tempera-
ture less than 70°F (21°C).
Use this information as a general guide. Consult your Conair
representative for assistance when choosing a Conair Portable
Chiller.