User guide

Operation

TrueBlend™

82 Edition: February 2008

7.10.2 Setting Weigh Bin Batch Weight

Materials with a lower bulk densities (ca. <35 lb/cu ft) may not fit in the weigh bin

and granulate may overflow. The batch weight must be reduced in this case. The

factory setting is 900 g for the TB100 model or 400 g for the TB045 model, (see

chart below).

Model Batch Weight Min Weight Maximum Weight

TB045 400 g 280 g 480 g

TB100 900 g 630 g 1100 g

TB250 2500 g 1750 g 3000 g

TB500 4000 g 2800 g 5000 g

TB900 8100 g 5700 g 9800 g

TB1800 18000 g 12600 g 21600 g

TB2500 25000 g 17500 g 30000 g

TB3500 35000 g 24500 g 42000 g

Î Press the input field beside "Batch

Weight and input the desired batch

weight with the keypad.

Î Confirm the value with

If the minimum value is not reached, the

minimum value from the chart is automati-

cally input. If the maximum value is ex-

ceeded, the maximum allowable value is

automatically input.

The batch weight can also be increased for

heavy bulk materials. This will make the

material throughput in lbs/hr somewhat

higher.

Î Make sure that the weigh bin does not

overflow.