User guide

Operation TrueBlend™
74 Edition: February 2008
7.8 Blending process
7.8.1 Assigning components – factory default setting
The components are assigned at the factory as follows:
Component 1: regrind
Component 2: natural material
Component 3: additive/natural (color)
Component 4: additive/natural (color)
Component 5: additive/natural (color)
Component 6: additive/natural (color)
The assignment of the components can also be changed
(see 7.9
Component setup).
4 position
Position 1
Position 2
Position 3
Position 4
Front door – mix chamber
Controller location
Fig. 11: Layout of the material hoppers-
four position models
(All models)