User guide

TrueBlend™ Operation
Edition: February 2008 55
7.6.4 Parameters/Global Reset (for service users only!) (Level 3)
The overscreen
Î Press the button beside "Parameters".
The "Control Variable" screen opens.
Î Assign a parameter number and a pa-
rameter value (no function currently
set).
Î Press
or depending
on whether the parameters should be
readout or set (no function currently
set).
Î Press
at "Global Reset" to reset
the controller completely. (Defaults to
the home screen.)
A "Global Reset" can also be done by
switching off the unit for more than two
minutes. Once “off” is pressed the unit will
default to the home screen.
Î Press the
button to toggle from
“off” to “on” at "Diagnostic Report" to
create accuracy reports for the service.
(Refer to Section 7.14 for connection
options.)
IMPORTANT
Please contact Conair service before
attempting to make a change to the
parameters, number or value. Currently,
there are no parameter functions that
can be set or changed.