User guide

TrueBlend™ Operation
Edition: February 2008 107
7.19.3 Changes to Loader Screen
Î Press a hopper loader icon in the
"Loader status" screen to open this
screen.
Î Enter the load time and the dump time.
The load time can only be changed if the
hopper loader is switched off or is in the
"Material discharging" status.
The minimum load time and the minimum
dump time is 2 seconds.
The maximum load time and the maximum
dump time is 180 seconds.
The status of the hopper loader is also
shown on the right (display: yellow dot).
The hopper loader can also be switched on
and off here.
7.19.4 Loader Alarm Settings
Î Enter the first fill alarm time. This time
allows an empty hopper to be filled for
a designated time period before an
alarm will be generated. The time starts
when the loader is turned on.
Î Enter the Alarm time. This is the
amount of time the hopper will be
loaded (after the first fill time) without
the demand being satisfied before an
alarm will be generated.