User guide

TrueBlend™ Operation
Edition: February 2008 101
7.16 Panel setup
Screen settings can be made here.
Contrast
Î Set the contrast (brightness) of the touch
panel (10-100; default 100).
Shutoff
Î Set the time after which the touch panel
will change to sleep mode (10-
600 seconds; default 180).
Contrast shutoff
Î Set the contrast (brightness) for sleep
mode (10-20; default 10).
The following settings are only required if
your unit is to be part of a network:
IP address (for service users only!)
(Level 3)
Î Input the IP address of the controller (de-
fault 192.168.3.249).
A reset is run after changing the IP address.
After the reset the controller must be
switched off and on again.