User guide

Before Beginning

You can avoid most problems by following the recommended installation and

maintenance procedures outlined in this User Guide. If you do have a problem,

this section will help you determine what caused it and how to fix it.

Before you open the side panels of the dryer be sure to:

❏ Diagnose causes from the control panel.

1 Press once to silence the optional audible alarm and display the

alarm message.

2 Address the alarm message and fix the problem. (Refer to the alarm

descriptions later in this section.)

3 Press again to clear the alarm. If the alarm reappears the problem

was not fixed.

Clear

Enter

Adjust Setpoint

Acknowledge

Alarm

Start

Stop

Select