User guide

Operation l 4-37
4
Operation
How to Use the Supervisor’s
Password (continued)
Be sure to push “ENTER” after entering the password. If the password is
entered successfully, screen 87 will be displayed.
Once the desired parameter has been changed, follow the previous steps to go
to screen 88.
Push the Select Category button under “No”. Once it begins to flash, push
either the Adjust Setpoint button to display “Yes”, then push “ENTER”. Push
the Menu button to return to the main display.
NOTE: The supervisor's password can be changed by going to screen 89, see page
4-4, for the map of the screens. See page 4-30, screen 89 for additional information on
changing the supervisory password.
VALID SUPERVISOR
PASSWORD ENTERED
LOGOUT SUPERVISOR
PASSWORD YES
✐