User guide

Function
4-30 l Operation
Control Function Descriptions(continued)
This is the password logout screen. If
nothing is done, the password will
automatically be logged out after 30
minutes. To logout, use the Select
Category button under the word Yes/No.
Setting it to Yes and hitting the “ENTER”
Key will change the display to "Logging
Out Password" for 3 seconds then will
automatically go to screen 14.
This screen allows the supervisor to
change the password. To change the
password, use the Select Category button
under the word, Yes/No. Setting it to yes
and hitting the “ENTER” Key will change
the display to screen 90. If the user does
not want to change the password, by
pressing the “Next” key the control will
return to the Dryer Setup Password screen
14.
This screen shows the password entry
screen. You can enter a new password by
using the key pad. Once a new password
has been entered the “ENTER” key must
be pressed. The display will show the new
password for 3 seconds then return to the
Change Supervisor Password (screen 89).
To exit, press the “Next” key and the
control will return to the Dryer Setup
Password Screen.
This is the Dryer Diagnostic screen. It can
be found by pressing the Select Category
button under the word Diag on the Dryer
Main Menu screen 12. By pressing the
Select Category buttons under the titles,
the user can select to see diagnostic
information for Alarms, Alarm History,
or Inputs and Outputs.
Screen
SCREEN 88
SCREEN 89
SCREEN 90
SCREEN 91
CHANGE SUPERVISOR
PASSWORD YES
ENTER NEW PASSWORD
DRYER DIAGNOSTIC
ALRM HIST I/O
LOGOUT SUPERVISOR
PASSWORD YES