User guide

4
Operation
Function
Control Function Descriptions
(continued)
Operation l 4-27
This screen further defines the dryer type
to a model number. Based on the dryer
type, the selections on this menu will
change. Your dryer should be configured
from the factory. However, if the control
was replaced, the control may need to be
reconfigured. With the proper password,
(see page 4-29, screen 85) the Model
Number can be changed by pressing the
Select Category button under the word
Edit. The “ENTER” key must be pressed
to lock in the selection.
This screen defines the voltage and
frequency at which the dryer will be
running. This setting should match the
electrical label on the side of the control
box. Your dryer should have been config-
ured from the factory. However, if the
control was replaced or the dryer was con-
figured to run on another voltage, this
screen may need to be reconfigured. With
the proper password, (see page 4-29,
screen 85) the Voltage and Freq can be
changed by pressing the Select Category
button under the word Edit. The
“ENTER” key must be pressed to lock in
the selection.
Screen
SCREEN 78
SCREEN 80
MODEL NUMBER
CP600 EDIT
VOLTAGE FREQ
208 V 60 HZ EDIT