User guide

Function
4-16 l Operation
Control Function Descriptions(continued)
Screen
SCREEN 30
SCREEN 31
SCREEN 32
SCREEN 33
SCREEN 34
MODEL CP600-5000
480 V 60 Hz
DISPLAY FIRM V2.21.00
DISPLAY MENU V2.21.00
CONTROL FIRMWARE
VERSION V2.21.00
AUTOSTART COUNT DOWN
1 DAYS 23:05:53
This screen shows the model number,
voltage, and frequency for which the
dryer control is setup. These values can
be changed with the proper password on
screen 85, see page 4-27 (screen 80) under
SETUP, OTHER, INSP, Model number
(screen 78), and Voltage FREQ (screen
80).
This screen shows the current versions of
program for the Display Firmware and
Menus.
This screen shows the current versions of
program for the Control Firmware.
If the dryer is set with an auto start time,
this screen will appear and show the
amount of time remaining before the dryer
will automatically start. The LED on the
front of the display, beside the word Auto
Start, will flash if the dryer is set to start
automatically. The auto start feature can
be programmed under SETUP, PROC,
PROC, OTHER (screens 55 and 56, pages
4-20 and 4-21). The dryer can be set to
automatically start each day.
If the dryer is set to auto stop, this screen
will appear and show the amount of time
remaining before the dryer will automati-
cally stop. The auto stop feature can be
programmed under SETUP, PROC,
OTHER (screens 55 and 57, pages 4-20
and 4-21). The dryer can be set to
automatically stop each day.
AUTOSTOP COUNT DOWN
3 DAYS 11:04:23
Tip: This information is
important to know when
ordering a control board.
Tip: This information is
important to know when
ordering a display board.
✒
✒