User guide

Installation l 3-15

Installation

Connecting the Dryer to the Hopper

If your dryer hose connection and your hopper HTC hose connection are not the

same size, you will need a hose adapter. Contact Conair Parts 1 800-458-1960.

Connecting the Dryer to

ResinWorks

If your dryer hose connection and the connection on your ResinWorks sled are not

the same size, you will need to use a hose adapter. Contact Conair Parts

1 800-458-1960.

NOTE: Because the W600 - 5000 models require a separate heat source for the

delivery air, all references to this heat source will be identified as “HTC” (Hopper

Temperature Controller). When using this dryer with an HTC, reference the User

Guide supplied with the HTC for installation instructions.

✐

NOTE: Because the W600-5000 models require a separate heat source for the deliv-

ery air, all references to this heat source will be identified as ResinWorks. When

using this dryer with a ResinWorks sled reference the User Guide supplied with the

ResinWorks sled for installation instructions.

✐