User guide

Installation l 3-13

Installation

Connecting the Air Hoses to a

Single Hopper (W1600 - 5000)

Using the two flexible hoses provided, connect the inlet of the HTC and outlet

of the drying hopper to the dryer. Make sure the dryer is located as close as

possible to the hopper (10 ft {3.05 m} of hose supplied).

1 Attach one hose from the return

air inlet, located on top of the

dryer, to the outlet of the hopper.

2 Attach one hose from the delivery

air outlet, located on top of the

dryer, to the inlet of the HTC.

3 Secure hoses with clamps. The hose clamp should be secured at least 1/4

in. {0.64 cm} from the end of the inlet or outlet tube.

NOTE: Do not allow the

flexible hoses to kink or

crimp.

✐

Return Air

Inlet

Delivery Air

Outlet