User guide

Connecting the Main Power
CAUTION: Always disconnect and lock out the main power sources before
making electrical connections. Electrical connections should be made only by
qualified personnel.
1 Open the dryer’s electrical enclosure. Turn
the disconnect dial on the dryer door to the Off
or “O” position. Lock out the main power (see
Page 1-6 for complete lock out information).
Turn the captive screw, and swing the door
open.
2 Insert the main power wire through the knockout in the side of the enclosure
or the rear of the dryer. (the dryer’s electrical wire connection location was a
factory option and may be connected through the front or the rear of the dryer.)
Secure the wire with an appropriate strain relief.
3-8 l Installation
IMPORTANT: Always refer to the
wiring diagrams that came with
your dryer before making electrical
connections.
3
Connect the power wires
to the three terminals at the top of the power
disconnect holder.
4 Connect the ground wire to the ground lug as shown in the photo.