User guide

4-2 l Operation
Auto Start
Dryer Status
Process Blower Regen. Blower
Regen. Heater
Set Point Actual
1 Process Temp.
2 Regen. Temp.
3 Return Air Temp.
4 Auto Start
5 Load Time (MDC)
6 Activate Setback Temp.
7 Setback Temp.(Process)
8 Dewpoint
Shutdown Alarms
A1 Process High Temp
A2 Process Loop Break
A3 Process Heater High Temp
A4 Regen Heater High Temp
A7 Return Air High Temp
A49 Process Protection High Temp
A53 Process Blower Overload
A55 Wheel Rotation Failure
Passive Alarms
P1 Process Temp Deviation
P3 Regen Temp Deviation
P5 Return Air Mid High Temp
P17 MDC Conveying Demand
1000
Carousel Plus W Series Dryer: Control Panel DC-1
Setpoint
Display
Shows the setpoint
value.
Menu List
Numbers 2, 3, and 4 are standard items that will
always be present. Number 8 is a screen associat-
ed with options. If the option is not installed, the
screens will not be displayed.
NOTE: #1 Process is not displayed when
the unit is configured as a central dryer.
Acknowledge
Alarm Button
Press once to
silence the option-
al audible alarm
and display alarm
messages. Press
again to clear the
alarm. If pushed
when no active
alarm is present,
the most recent
alarm will be
displayed.
Start and Stop
Buttons
Press “Start” to start the dryer.
Press “Stop” to stop the dryer.
Increment/Decrement
Buttons
Used to increase and/or decrease the set-
point of a control function.
Actual
Display
Shows the actual
temperature value.
Menu
Number
Display
Displays the
menu number
correspon-
ding to what
is shown in
the setpoint
and actual
displays.
Can also dis-
play letters
for alarms
and setup.
Scroll
Button
Press to
scroll
through the
closed loop
menu list.
Pressing the
Scroll button
moves you
down the list.
Alarm Codes
See Troubleshoot-
ing section for a
more complete list-
ing of alarms.
NOTE:
Process related
alarms are not
applicable
when the unit
is configured
as a central
dryer.
✐
✐