Technical information

11
Product Overview
All thumbwheels are mounted in a small self-contained enclosure. Pre-assembled cables may
be purchased for electrical connection to the application module.
T-16 Numeric Display
The T-16 Numeric Display is available with the IOM-1, PCM-1, -2 and -4 modules. The T-
16 displays the position or velocity of the FX drive through the parallel interface connector.
The large LEDs are easily visible at a distance to allow monitoring at different positions on
the machine. Pre-assembled cables may be purchased for electrical connection to the
application module.
T-21 Data Entry Terminal
The T-21 Data Entry Terminal allows the user to enter data and display different motion
parameters. The T-21 can also be programmed to display up to 98 user specific messages
unique to the application. The T-21 communicates with the FX drive through the serial
interface. No application module is required. Consult the EMERSON Motion Control Product
Catalog (410153-02) or T-21 Data Entry Terminal Manual (400192-00) for further details.
T-60 Operator Interface
The T-60 Operator Interface Terminal allows the user to quickly and easily set up and operate
a FX drive. The T-60 is perfect for providing flexible overall control and operator interface
for just about any application which needs an easy to use, intelligent operator interface. The
T-60 communicates with the FX drive through the serial interface. No application module is
required. Consult the EMERSON Motion Control Product Catalog (410153-02) or T-60
Operator Interface Terminal Manual (400295-00) for further details.