Technical information

5
Introduction
PCX programming software for the FX drive. Setup of the I/O functions is explained
in“Software Setup and Operation” on page 67 of this manual.
These inputs and outputs can connect to a PLC, limit switches, or switches and indicators on
an operator’s control panel. An LED indicator associated with each input and output provides
visual feedback of I/O activity.
Figure 7: Location of I/O Terminals
FX-AMP
COMMAND
SERIAL 1A
SERIAL 1B
8 INPUTS
4 OUTPUTS
1
2
3
4
5
6
7
8
9
10
11
12
LED INDICATORS
TERMINAL CONNECTIONS
(TWO PER I/O LINE #)