Technical information

158
230V FX Series Positioning Drive Reference Manual
Performance
Position Accuracy:
Cable Feedback
LengthAccuracy
_________________________________________
15 feet±15 arc. Minutes
50 feet±25 arc. Minutes
100 feet±40 arc. Minutes
Velocity Accuracy: ±0.01% of set speed
Amplifier Thermal Shutdown
as Detected in Power Stage
All FX drives: 80° to 90° C (176° to 194° F)
Motor Thermal Shutdown
Wire ambient, in rear of motor, 80° C. Defeatable except DXM-8200, 8300 and 8400 motors.
Windings (internal) 155° C (~ 110° C case) 311° F (~230° F case)
Serial Interface
Optically isolated RS-423 (Serial A and B - signal compatible with RS-232C and RS-422) XMIT, REC
and GND.
Baud rates: 110 to 19K baud.
Axis Identifier: 1 through 9, A through V (31 total for multi-axis drop).
Programming Methods
PCX programming software for IBM compatible PCs.
RS423C serial ASCII terminal (RS-232 and RS-422 signal compatible).
T-21 Data Entry Terminal.
T-60 Operator Interface Terminal.
Diagnostics Indicator
Front panel, eight segment LED.
Noise Immunity
AC line: Tested to IEEE Standard. C62.41 - 1980, Cat. B., Impulse wave.
Designed to meet IEC801 standard.
Input/Output Lines
Inputs:
10.5 to 30 VDC (internal current limit provided) 12, 15 and 24 VDC typical.
Outputs:
Sink or source (two terminals) 200 mA maximum, 30 VDC maximum each output. External current
limiting required.
Basic FX drive:
12 optically isolated DC (8 input and 4 outputs per FX drive).
PCM Application Modules:
Additional 12 optically isolated DC (8 input and 4 outputs per PCM Module).
Input/Output Functions
Maximum of 192 functions assignable to any I/O line (Dependent on PCM Application Module used with
the FX drive).
Motor Enclosure
TENV, waterproof per IP65 (dust-tight), waterproof against 3.3 GPM water stream from 0.25"/6.35mm
I.D. nozzle.
System Environment
Operating temperature:
Amplifier: Ø° to 45°C (32° to 113°F)
Motor: Ø° to 90°C (32° to 194°F)
De-rate available torque by 1% per degree celsius for operation above 30° C for both motor and amplifier.
Relative Humidity: Ø to 95%. Non-condensing.
Storage Temperature: -40°C to 85°C.