Technical information

114
230V FX Series Positioning Drive Reference Manual
Feed On/Off (home to sensor then off sensor)
The “Feed Off Velocity” should be kept below 50 RPM for the default decel ramp to the final
position.
Figure 80: Feed On/Off Home Motion Profile
Feed On/Off/Offset (home to sensor then to resolver Ø + offset)
The “Offset Velocity” should be kept below 50 RPM for the default decel ramp to the final
velocity.
Figure 81: Feed On/Off/Offset Home Motion Profile
VELOCITY
TIME
(+)
(-)
ACCEL
INITIATE
SENSOR ON
FEED OFF VELOCITY
SENSOR OFF
FEED ON VELOCITY
DECEL
DECEL
VELOCITY
TIME
(+)
(-)
ACCEL
INITIATE
SENSOR ON
SENSOR OFF
OFFSET FROM RESOLVER
FEED ON VELOCITY
DECEL
DECEL
FEED OFF VELOCITY
ZERO (USER SPECIFIED)
RESOLVER 0