Technical information

106
230V FX Series Positioning Drive Reference Manual
20 Torque Limit Hit
This output is normally inactive and will turn on when the “Torque Limit” is reached as set
in “Limits” screen. The only way to deactivate this output is with the “Clear Torque Limit
Output” input function. Does not cause a fault condition.
31 Position Window Timeout
This output will activate if a Position Window does not complete before the In Position
timeout expires.
45 Out Of Index
The “Out Of Index” output is used to indicate that the motor position is not within the faulted
index distance when a Suspend occurs as a result of a fault. This output will become active if
the motor moves past the end of an index during a Suspend Upon Fault, or is moved
backwards before the faulted position where the Suspend was activated. This function must
be deassigned serially (OF45=XX). It is uploaded and downloaded by PCX.