Technical information

103
Software Setup and Operation
Figure 71: Output Functions Screen
Description of Output Functions
0 Ready
This output is On continuously after power up if the microprocessor and its memory are
operating correctly. It deactivates when either a Watchdog Timer Fault or Uninitiatized Fault
occurs. To be active, this output must be assigned and the drive powered down, then up.
1 External Mode
This output is On when the FX drive is ready to be operated from external I/O. This output is
Off when the FX drive is in serial control, such as when PCX home or Index screens are in
control, or if the axis is in motion.
2In Motion
This output is active whenever the commanded velocity is not zero.