Technical information

The SC Carousel Dryer has disposal desiccant tanks. The
tanks have been sealed, and should require no contact with the
desiccant. When desiccant becomes clogged or contaminat-
ed, you should replace all three tanks to ensure optimum
performance.
Stop the dryer and
disconnect power.
Remove the
carousel cover.
Disconnect the hose
from the desiccant
tank.
Loosen the hose clamp
with a screw driver.
Lift the tank off the
carousel assembly.
Discard the conta-
minated tank.
Check the O-rings
in the carousel coupling.
Replace any O-rings that
are cracked, worn or
damaged. Apply petrole-
um jelly on the inside of
the coupling around the
O-ring.
Place a new tank
on the carousel
assembly. Make sure the
inlet/outlet tube of the
tank seats fully into the
O-rings on the
carousel pipe.
Connect the hose to
the top of the tank.
Secure with the hose
clamp.
Replace the
carousel cover.
TROUBLESHOOTING 6-13
UGD001/1196 SC Carousel Dehumidifying Dryer
REPLACING
DESICCANT
TANKS
2
3
1
4
5
6
O-ring
7
8
9
TIP: It’s important
that the new tanks
are connected to the
correct hoses. Mark
the hoses as they are
disconnected, or
replace one tank at a
time, to ensure that
you install the new
tanks in the correct
positions.