Technical information

TROUBLESHOOTING 6-11

UGD001/1196 SC Carousel Dehumidifying Dryer

ADDING AN

AFTERCOOLER

You can add an aftercooler to the SC Carousel Dryer by order-

ing the optional aftercooler coils. Installation is easy.

The optional aftercooler requires a source of city, tower or

chiller water and a discharge or return line. You can use water

at temperatures up to 90˚ F (32˚ C). But the water flow should

be at least 3 gallons (11.36 liters) per minute.

Stop the dryer and dis-

connect power.

Remove the aftercooler

housing cover.

Insert the aftercooler

coils into the housing.

Make sure the latches on the

housing are aligned with the

latch holes in the aftercooler

coil lid.

Secure the latches.

Connect the cooler inlet

to the water source.

If a manual shut off valve is

used, it should be mounted on

the inlet line.

Connect the cooler out-

let to a discharge or

return line.

TIP:

Make the connections

with flexible hose at least

14 inches (35.5 cm) long.

This allows you to easily

remove the cooler coils for

cleaning.

1/2 inch NPT

female couplings