Datasheet

Contact Form Change-Over
Contact Material Rhodium
Switching Capacity Max. 60 W/VA
Switching Voltage Max. 400 VAC / DC
Switching Current Max. 1.0 A
Carrying Current Max. 2.0 A
Dielectric Strength Min. 1000 VDC
Contact Resistance Max. 100 mΩ
Insulation Resistance Min. 10
9
Ω
Pull - In Sensitivity 50 - 80 AT
Drop - Out Sensitivity Min. 20 AT
Switching Time without Bounce Max. 4.0 ms
Bounce Time Max. 0.5 ms
Release Time Max. 0.15 ms
Resonant Frequency Typ. -
Operating Frequency Max. 100 Hz
Vibration (10-1000Hz) 35 g
Shock (11 ms) 50
Capacitance Typ. 1.0 pF
Operate Temperature Range -40°C + 125°C
Test Coil Type 1500
Part Number: GC1917
Reed Switch - Standard - Change-Over Contacts
Product Data Sheet
PICTURE
ORDERING INFORMATIONNOTE
DIMENSIONS
PART NUMBER GC1917 50 80
•
Type
•
Minimum (AT) Sensitivity
•
Maximum (AT) Sensitivity
70
(2.75)
36
(1.42)
2.5 x 0.5
(0.09 x 0.01)
Ø5.6
(Ø0.22)
Drawings not to scale.
All dimensions in mm (inches).
Phone: [phone] www.comus-intl.com Fax: [phone]
As part of the company policy of continued product improvement, specications may change without notice. Our sales ofce will be pleased to help you with the latest information on this product range and
the details of our full design and manufacturing service. All products are supplied to our standard conditions of sale unless otherwise agreed in writing.
An ISO 9001 Certied Company
Belgium: + 32 (0)12 390400 - Assemtech, UK: [phone] - Germany: [phone]
©2013 Copyright Comus International, 454 Allwood Road, Clifton NJ 07012, USA
•
When cutting or bending switch leads it is important that the
glass seal is not damaged. The cutting or bending point should
be no closer than 3mm (0.118in.) to the glass to metal seal and
the lead should be supported between the cutting or bending
point and the glass to metal seal.
•
We offer a crop and form service for Reed Switches to be
customized to your specification.
SPECIFICATION