Installation

62 - Managing the DeviceMaster UP Hardware Installation and Configuration Guide: 2000451 Rev. J
Managing the DeviceMaster UP
Accessing RedBoot Commands in Telnet/SSH Sessions (PortVision DX)
You can open a Telnet or SSH session using PortVision DX to access RedBoot
commands.
Use the following procedure to access a telnet or SSH session with PortVision DX.
1. In PortVision DX, PortVision DX, right-click the DeviceMaster UP in the
Device List pane for which you want to open a telnet session, and click Telnet/
SSH Session.
2. Select Telnet or SSH, leave the Selected Port number, and click Ok.