Installation for Windows 98 User guide

Adding Serial Printers 28

Configuring Printers

Use this subsection to configure printers for the RocketPort Serial Hub Si after installing the RocketPort

Serial Hub Si hardware and driver.

Adding Serial Printers

Follow these steps to configure a serial printer.

Note: You may need the Windows 95/98 CD-ROM in order to load drivers and complete printer installation.

Make sure you have this CD on-hand before beginning the process.

1. Connect the printer to the desired port. Use a DTE-to-DTE null modem cable unless the printer maker

specifies otherwise.

2. From the

Start

button menu, select

Settings

, then

Printers

3. Double-click on the Add Printer icon. The Add Printer Wizard starts.

4. Click