User Manual
Table Of Contents
- Table of Contents
- Overview
- Installing the Device Driver
- Configuring Non-Plug and Play Devices
- Comtrol Tools
- Troubleshooting and Technical Support
- Index
Installing the Device Driver 13
Upgrading the Driver (Existing Installation)
13. Select Next if you want to enable the adapter.
14. Select Finish to
complete the process
of enabling the
adapter.
15. You can close this window or
configure adapter or COM port
properties using the Main
Setup and Options tabs. For
configuration procedures, see
Changing or Configuring
Device Properties on Page 19
or Configuring Port Properties
on Page 21.