Manual

Driver and Adapter Information 17

Changing or Viewing Adapter Configuration

To view or change adapter configuration after installation, follow these steps:

1. Start the Comtrol Setup program. The Main Setup tab appears:

2. In the Configuration list, select on the adapter you want to work with and

select the Properties button.

Note: The Summary group displays the basic device configuration, as entered

using the Add Device Wizard. If this information is not correct, you

must remove and re-add the device.

3. You can view or change the following as desired:

a. Name. The default device name is assigned by the Add Device Wizard. If

desired, you can enter a more descriptive name.