User Manual

ManualsBrandsComtrol ManualsAccessories communicationMC5001

DIP Switch Setting

LED Functions

RS-232

RS-485/2 wires

RS-485/4 wires

RS-422/4 wires (Default)

Function DIP Switch 2

OFF

OFF (Default)

DIP Switch 1

OFF

OFF (Default)

Note: After adjusting the DIP-switch, reboot the unit to activate the new settings.

Point to Point /Serial Ring

120 Ohm Terminator (TX)

120 Ohm Terminator (RX)

Function Switch position

Off (PTP)/On (SFR ), Default off (PTP)

Off (Disable)/On (Enable), Default off

DIP Switch

Switch 5

Switch 4

Switch 3

PWR

LED Function

Lit when the MC5001 is properly powered up and the status of the unit is OK.

Lit when transmitting data.

Lit when receiving data.

Lit when operating in SFR mode.

Ring

2000504 Rev. B www.comtrol.com

Quick Installation Guide

Comtrol Customer Service

Contact Method Web Address or Phone Number

Support http://www.comtrol.com/pub/en/support

Downloads ftp://ftp.comtrol.com/html/default.htm

Web Site http://www.comtrol.com

Phone 763.957.6000

Comtrol Corporation

+1 763.957.6000

sales@comtrol.com

www.comtrol.com

ROCKETLINX MC5001

Industrial Serial to Fiber Media Converter

www.comtrol.com

2000504 Rev D

Summary of content (8 pages)

PAGE 1
Comtrol Customer Service DIP Switch Setting DIP Switch 1 DIP Switch 2 RS-422/4 wires (Default) Contact Method Web Address or Phone Number OFF (Default) OFF (Default) RS-485/4 wires OFF OFF Support http://www.comtrol.com/pub/en/support RS-485/2 wires OFF ON Downloads ftp://ftp.comtrol.com/html/default.htm RS-232 ON OFF Web Site http://www.comtrol.com Phone 763.957.
PAGE 2
GND provides good immunity for EMI/EMC. The RocketLinx MC5001 supports 15KV ESD signals to 5KM or 40KM by optical fiber cable. The converter operating architecture can also PC with 4-wires RS-422/485 protection on the serial line. It also features a wide power input range be configured as a PTP (Peer to Peer) or SFR (Serial Fiber Ring) to enlarge the serial (12-48VDC/12-32VAC) and DIN rail mounting for quick and easy installation. communication infrastructure and link additional MC5001s.
PAGE 3
GND provides good immunity for EMI/EMC. The RocketLinx MC5001 supports 15KV ESD signals to 5KM or 40KM by optical fiber cable. The converter operating architecture can also PC with 4-wires RS-422/485 protection on the serial line. It also features a wide power input range be configured as a PTP (Peer to Peer) or SFR (Serial Fiber Ring) to enlarge the serial (12-48VDC/12-32VAC) and DIN rail mounting for quick and easy installation. communication infrastructure and link additional MC5001s.
PAGE 4
GND provides good immunity for EMI/EMC. The RocketLinx MC5001 supports 15KV ESD signals to 5KM or 40KM by optical fiber cable. The converter operating architecture can also PC with 4-wires RS-422/485 protection on the serial line. It also features a wide power input range be configured as a PTP (Peer to Peer) or SFR (Serial Fiber Ring) to enlarge the serial (12-48VDC/12-32VAC) and DIN rail mounting for quick and easy installation. communication infrastructure and link additional MC5001s.
PAGE 5
GND provides good immunity for EMI/EMC. The RocketLinx MC5001 supports 15KV ESD signals to 5KM or 40KM by optical fiber cable. The converter operating architecture can also PC with 4-wires RS-422/485 protection on the serial line. It also features a wide power input range be configured as a PTP (Peer to Peer) or SFR (Serial Fiber Ring) to enlarge the serial (12-48VDC/12-32VAC) and DIN rail mounting for quick and easy installation. communication infrastructure and link additional MC5001s.
PAGE 6
Comtrol Customer Service DIP Switch Setting DIP Switch 1 DIP Switch 2 RS-422/4 wires (Default) Contact Method Web Address or Phone Number OFF (Default) OFF (Default) RS-485/4 wires OFF OFF Support http://www.comtrol.com/pub/en/support RS-485/2 wires OFF ON Downloads ftp://ftp.comtrol.com/html/default.htm RS-232 ON OFF Web Site http://www.comtrol.com Phone 763.957.
PAGE 7
Comtrol Customer Service DIP Switch Setting DIP Switch 1 DIP Switch 2 RS-422/4 wires (Default) Contact Method Web Address or Phone Number OFF (Default) OFF (Default) RS-485/4 wires OFF OFF Support http://www.comtrol.com/pub/en/support RS-485/2 wires OFF ON Downloads ftp://ftp.comtrol.com/html/default.htm RS-232 ON OFF Web Site http://www.comtrol.com Phone 763.957.
PAGE 8
Comtrol Customer Service DIP Switch Setting DIP Switch 1 DIP Switch 2 RS-422/4 wires (Default) Contact Method Web Address or Phone Number OFF (Default) OFF (Default) RS-485/4 wires OFF OFF Support http://www.comtrol.com/pub/en/support RS-485/2 wires OFF ON Downloads ftp://ftp.comtrol.com/html/default.htm RS-232 ON OFF Web Site http://www.comtrol.com Phone 763.957.