Manual

22 - Chapter 3. Initial Configuration IO-Link Master 4-EIP User Guide: 2000582 Rev. A
Setting up Passwords
3.3. Setting up Passwords
The IO-Link Master is shipped from the factory without passwords. See the following table if you want to see
how permissions are granted.
You can use this procedure to set up passwords for the IO-Link Master.
1. Open the IO-Link Master web interface using one of these method:
• From PortVision DX, highlight the IO-Link Master and click the Webpage button or right-click the IO-
Link Master in the Device List pane and click Webpage.
• Open your browser and enter the IP address of the IO-Link Master.
2. Click Advanced and then ACCOUNTS.
3. Click the ADMIN check box.
4. If applicable, enter the old password in the Old Password text box.
5. Enter the new password in the New Password text box.
6. Re-enter the password in the Confirm Password text box.
7. Optionally, click the Operator check box, enter a new password, and re-enter the password in the Confirm
Password text box.
Page Admin Operator User
Log-in Yes Yes Yes
Home Yes Yes Yes
Diagnostics - All Yes Yes Yes
Configuration - Port Settings Yes Yes No
Configuration - Network Yes No No
Advanced - Software Yes No No
Advanced - Accounts Yes No No
Advanced - Log Files Yes Yes Yes
Licences Yes Yes Yes
Help - All Yes Yes Yes