Owner manual

IO-Link Master EtherNet/IP Reference Manual: 2000589 Rev. A Chapter 8. Troubleshooting and Technical Support - 111
Using Log Files
8.3. Using Log Files
Log files are available in the IO-Link Master web page. The IO-Link Master provides four different log files
that you can view, export, or clear:
• Syslog (system log) displays line-by-line activity records.
• dmesg displays Linux kernel messages.
• top displays which programs are using most of the memory and CPU.
• ps displays the running programs
• All log files start up automatically during the startup cycle. Each log file has a size limit of 100KB.
Note: Typically, log files are intended to be used by Technical Support in the event there is a problem.
You can use the following procedures to:
• 8.3.1. View a Log File on Page 111
• 8.3.2. Clear a Log File on Page 111
• 8.3.3. Export a Log File on Page 112
8.3.1. View a Log File
Use this procedure to view a log file.
1. Open the IO-Link Master web interface using one of these method:
• From PortVision DX, highlight the IO-Link Master and click the Webpage button or right-click the IO-
Link Master in the Device List pane and click Webpage.
• Open your browser and enter the IP address of the IO-Link Master.
2. Click Advanced and then LOG FILES.
3. Select the log file type from the drop-list.
4. Optionally, click the REFRESH button to get the latest information.
5. Optionally, export
the log file.
8.3.2. Clear a Log File
Use this procedure to clear a log file.
1. Open the IO-Link Master web interface using one of these method:
• From PortVision DX, highlight the IO-Link Master and click the Webpage button or right-click the IO-