User Manual

88 - DeviceMaster Security DeviceMaster Installation and Configuration Guide: 2000594 Rev. A
Using a Web Browser to Set Security Features
Using a Web Browser to Set Security Features
The follow procedures are discussed below:
• Changing Security Configuration
• Changing Keys and Certificates on Page 89
Changing Security
Configuration
Use the following steps to change security settings in the DeviceMaster.
1. Enter the IP address of the DeviceMaster in the Address field of your web
browser and press the Enter key.
2. Click the Security tab.
3. Click the appropriate check boxes in the Security Configuration area to enable
or disable security accordingly.
Refer to the help system or Configure/Enable Security Features Overview on
Page 83 for detailed information.
4. After making changes to the Security Configuration area, click Save.
The Software displays as NS-Link, if you have installed
and configured a device driver.