Specifications

6 Copyright 2010 Schneider Electric All Rights Reserved. F-12586-11
Note: Figure 12 shows position for normally closed.
5. Manually position damper to full retracted actuator
position and tighten crank arm in position described in
Step 4.
6. Connect clevis to crank arm in hole closest to damper
shaft. If necessary adjust clevis and/or extensions.
7. Refer to Checkout.
Figure-12 MK-3800 Typical External Pivot Mounted.
Figure-13 Mk-3800 Series Mounting Plate.
Figure-14 MK-3800 Series Clevis.
Figure-15 AM-532 Bolt-On Frame Bracket.