Specifications
www.camfilfarr.com
Camfil Farr | 1 North Corporate Drive, Riverdale, NJ 07457 | Tel: (973) 616-7300
Performance Data
© Copyright Camfil Farr # 2301 - 0212
Type 8 Frame
For detailed specifications please consult your local Camfil Farr Distributor or Representative or www.camfilfarr.com.
Camfil Farr has a policy of uninterrupted research, development and product improvement. We reserve the right to change designs and specifications without notice.
ASHRAE Filter Holding Frame for Built-Up Bank
Specification
1.0 General
1.1 - Air filter holding frames shall be 16-gauge galvanized steel
with filter sealing flange, centering dimples, sealing gasket and
lances for appropriate air filter fasteners.
1.2 - Sizes shall be noted on drawings or other supporting
materials.
2.0 Construction
2.1 - Filter holding frame shall be constructed of 16-gauge
galvanized steel. The frame shall be assembled from two
corner sections and welded to assure a rigid and durable frame
assembly.
2.2 - The frame shall include a variety of pre-punched lances
for filter fastener attachment. Fastener shall be capable of
DATA NOTES:
Flat-stock stiffener bars are required for every other vertical row on filter banks 4 to 6 units high. Stiffener bars, screws, nuts, and rivets are not
supplied by Camfil Farr. Consult drawing B-073617.
For V-bank assembly consult drawing C-093248.
For mist removal installation consult drawing C-067125.
being installed without the use of tools, nuts or bolts. Lance
penetrations shall be upstream of filter flange to assure leak-free
integrity.
2.3 - The frame shall include filter centering dimples on each
frame wall to facilitate ease of filter installation and assure filter
centering against filter sealing flange.
2.4 - A 3/4” filter sealing flange shall be an integral component
of the holding frame. All corners shall be flush mitered and
a permanently mounted polyurethane foam gasket shall be
mounted on the sealing flange to assure filter to frame sealing
integrity.
3.0 Performance
3.2 - Manufacturer shall provide evidence of facility certification
to ISO 9001:2008.
Part
Number
Actual Depth
(inches)
Actual Dimensions
(inches)
Weight
(lbs)
Height Width
Standard Built-up Bank Application
079473-004
079473-003
079473-007
079473-001
Frames for HP Basket Assembly Applications
Available options:
Available with or without gasket
(standard units include gasket).
Available in 20-gauge stainless steel,
304, 304L, 316, 316L and 430.
For fasteners please consult Camfil Farr
Bulletin 2902-0302.